NerdQaxe++ Rev7 Hydro Bitcoin Miner – 7 TH/s 115W BM1370

The NerdQaxe++ Rev7 Hydro is the latest generation of the compact open-source Bitcoin home miner, combining four Bitmain BM1370 ASIC chips with an all-new dual-phase VRM power architecture and efficient water cooling.

Designed for home miners, developers and Bitcoin enthusiasts looking for increased performance with excellent thermal control, the Rev7 Hydro delivers approximately 7 TH/s at around 115W, providing genuine multi-ASIC SHA-256 mining performance from a compact desktop system.

The Hydro cooling system allows the Rev7 to operate at a higher performance level than the air-cooled version while efficiently transferring heat away from the ASICs and avoiding the need for a high-speed primary cooling fan directly on the miner.

All-New Rev7 VRM Power Architecture

One of the most important developments in the NerdQaxe++ Rev7 Hydro is its redesigned TPS546D24A dual-phase Voltage Regulator Module (VRM) power architecture.

Rather than concentrating solely on increasing hashrate, the Rev7 redesign focuses heavily on improving the stability and balance of the power supplied to its four BM1370 ASIC chips, particularly during sustained higher-performance operation.

The redesigned VRM architecture is intended to provide:

• More Stable ASIC Power Delivery – helping maintain consistent operation across all four BM1370 ASICs
• Better Balanced Power Distribution – improved power delivery during sustained mining workloads
• Reduced VRM Thermal Load – helping reduce thermal stress within the voltage regulation system
• Improved System Reliability – the revised architecture is designed to address weaknesses associated with the previous VRM design
• Greater Long-Term Stability – particularly important for miners intended to operate continuously

For a compact Bitcoin miner designed for continuous operation, the redesigned power architecture represents one of the most significant developments introduced with Rev7.

Approx. 7 TH/s at Only 115W

Powered by 4 × Bitmain BM1370 ASIC chips, the NerdQaxe++ Rev7 Hydro delivers approximately 7 TH/s while consuming around 115W at its rated operating configuration.

This equates to an efficiency of approximately 16.4 J/TH, providing impressive SHA-256 mining performance from a compact, relatively low-power desktop miner.

The BM1370 is from the same generation of Bitmain ASIC technology used within the Antminer S21 Pro, allowing the NerdQaxe++ to provide genuine multi-ASIC Bitcoin mining capability without the electrical requirements of a full-size industrial ASIC miner.

Hydro Water Cooling

The NerdQaxe++ Rev7 Hydro replaces the conventional primary air-cooled heatsink and fan arrangement with an efficient water-cooling system designed to rapidly transfer heat away from the ASICs.

Water cooling provides excellent thermal control during sustained higher-performance operation and allows the Hydro model to achieve approximately 7 TH/s while maintaining a compact desktop form factor.

The Hydro configuration also eliminates the need for the high-speed primary ASIC cooling fan found on conventional air-cooled miners, helping provide a quieter mining environment.

This makes the Rev7 Hydro particularly attractive for homes, offices, studios, workshops and Bitcoin home labs where both performance and acoustic comfort are important.

Please Note: As with any water-cooled system, suitable coolant circulation and correct installation of the cooling system are essential. Cooling equipment should always be checked for correct operation before and during mining.

Bitcoin & SHA-256 Mining

Using the SHA-256 algorithm, the NerdQaxe++ Rev7 Hydro is compatible with Bitcoin (BTC) and other compatible SHA-256 cryptocurrencies.

Its combination of four ASIC chips, approximately 7 TH/s hashrate and relatively low power consumption makes it particularly well suited to solo Bitcoin mining, home mining, development, experimentation and learning about the Bitcoin mining ecosystem.

Wi-Fi & Web-Based Management

Built-in 2.4 GHz Wi-Fi provides convenient network connectivity without requiring an Ethernet connection.

Mining configuration and monitoring can be managed through the miner's web-based interface, allowing users to configure mining pools and monitor operating information directly from a web browser.

As part of the open-source Bitcoin mining ecosystem, the NerdQaxe++ provides an accessible platform for enthusiasts who want greater control and visibility than is typically available from conventional industrial mining hardware.

Built-In 1.9" Colour Display

A built-in 1.9" colour LCD display provides useful real-time operating information directly on the miner, allowing key performance and system information to be viewed at a glance.

Designed for Continuous Home Mining

The Rev7 Hydro development focuses not only on increasing hashrate but also on improving the underlying power delivery and thermal characteristics of the NerdQaxe++ platform.

The redesigned dual-phase VRM architecture works alongside the Hydro cooling system to provide improved power and thermal management during sustained operation.

With approximately 7 TH/s at around 115W, the Rev7 Hydro provides considerably more mining performance than many conventional low-power home miners while remaining practical for home-scale operation.

Key Features

• Model: NerdQaxe++ Rev7 Hydro
• Hashrate: Approx. 7 TH/s
• Power Consumption: Approx. 115W
• Efficiency: Approx. 16.4 J/TH
• Algorithm: SHA-256 / Bitcoin Compatible
• ASIC Chips: 4 × Bitmain BM1370
• VRM: Redesigned TPS546D24A Dual-Phase Architecture
• Cooling: Hydro Water Cooling System
• Connectivity: 2.4 GHz Wi-Fi
• Display: 1.9" Colour LCD
• Power Connector: XT30
• Firmware: Open-Source
• Form Factor: Compact Desktop Design

Technical Specifications

• Type: Bitcoin / SHA-256 Miner
• Model Number: NerdQaxe++ Rev7 Hydro
• Algorithm: SHA-256
• Hashrate: ~7 TH/s
• Power Consumption: ~115W
• Efficiency: ~16.4 J/TH
• ASIC Chips: 4 × Bitmain BM1370
• VRM Architecture: TPS546D24A Dual-Phase
• Power Input: XT30 Connector
• Cooling System: Hydro Water Cooling
• Display: 1.9" Colour LCD
• Network: 2.4 GHz Wi-Fi
• Form Factor: Compact Desktop Design
• Warranty: 60 Days

What's Included

• 1 × NerdQaxe++ Rev7 Hydro Bitcoin Miner
• 1 × Complete Hydro Water-Cooling System
• 1 × Suitable Power Supply
• 1 × Suitable Power Lead / Plug
• 1 × eHasher Operating & Performance Guide

Ready to Run: The NerdQaxe++ Rev7 Hydro is supplied as a complete Hydro mining package. No additional water-cooling components are required – simply complete the initial miner setup and connect to your chosen mining pool.

The NerdQaxe++ Rev7 Hydro combines four Bitmain BM1370 ASIC chips, a redesigned dual-phase VRM power architecture and efficient water cooling to deliver approximately 7 TH/s at around 115W, creating a powerful, efficient and comparatively quiet open-source Bitcoin mining platform for home use.

• ⭐⭐⭐⭐⭐ Verified Customer Feedback
• ✅ Individually Configured & Quality Checked Before Dispatch
• 📖 eHasher Operating & Performance Guide Included
• 🚚 Fast UK Shipping

Tags: NerdQaxe++ Rev7 Hydro, NerdQaxe++, NerdQaxe Hydro, Bitcoin Miner, Hydro Miner, Water Cooled Miner, Solo Miner, Home Bitcoin Miner, BM1370, 7 TH/s, SHA-256, Open Source Miner, Low Power Bitcoin Miner